PureStorage

CLI

List snapshots

purevol list --snap --space

volume1_datatore.176              1536G  1.67G
volume2_datatore.178              1536G  1.66G
volume3_datatore.179              1536G  1.43G

Show volume replication progress/status

purepgroup list --snap --transfer --target

Example output:

Name                  Source            Created                  Started                  Completed                Progress  Data Transferred  Physical Bytes Written
STORAGE01:Tier-4.138  STORAGE01:Tier-4  2019-06-18 18:00:00 BST  2019-06-18 18:00:00 BST  2019-06-18 18:00:19 BST  100.00%   1.16G             1000.16M
STORAGE01:Tier-4.136  STORAGE01:Tier-4  2019-06-17 18:00:00 BST  2019-06-17 18:00:00 BST  2019-06-17 18:00:25 BST  100.00%   1.55G             1.40G
STORAGE01:Tier-4.134  STORAGE01:Tier-4  2019-06-16 18:00:00 BST  2019-06-16 18:00:00 BST  2019-06-16 18:00:20 BST  100.00%   1.04G             913.38M

Enable support assist

purearray remoteassist --connect

Show capacity there is on the array

purearray list --space

Example output:

Name         Capacity  Parity  Provisioned Size  Thin Provisioning  Data Reduction  Total Reduction  Volumes  Snapshots  Shared Space  System  Total
STORAGE01    57.06T    100%    183765G           57%                2.9 to 1        6.8 to 1         24.85T   9.51T      2.00T         0.00    36.36T

Show controller status and firmware version

purearray list --controller

Example output:

Name  Type              Mode       Model     Version  Status
CT0   array_controller  secondary  FA-X50R2  5.1.10   ready
CT1   array_controller  primary    FA-X50R2  5.1.10   ready

‎<comments />