AnywhereUSB/14
Here are some basic steps to get your AnywhereUSB/14 on the network, the rest of the config can be done via the webUI. 1. Connect a serial cable to the management port 2. Use Putty to make a serial connection to the device and you will get a screen as below: #> 3. From there type: set network This will display the current network configuration for the ethernet port, make note of the ethernet interface, its normally "eth0": #> set network "eth0" interface configuration: MAC Address : 00:40:9D:C2:45:A0 Currently in use by the network stack Stored configuration -------------------- ------------------- ipaddress : 169.254.90.52 0.0.0.0 submask : 255.255.0.0 0.0.0.0 gateway : 0.0.0.0 0.0.0.0 static : off off dhcp : on ...